HOLE SAWS BI-METAL HOLE SAW • More teeth, deeper gullet in the cutting action increases material removal for improved control of the cutting process with excellent chip clearing capacity • New tooth form maximizes penetration with a positive rake face for increased resistance with optimized flank and secondary angles • Positive rake face is fully radius for material flow away from the cutting edge for more efficient cutting • Advance setting process balances the cutting edge for maximum cutting performance • Newly engineered manufacturing process for increased control in high torque applications and longer wear resistance • Depth of hole saw is suitable for professional users for the ability to cut through a 2 x 4 in one pass • Engineered with the strongest tooth profile available in the marketplace for impact resistance while maintaining cutting penetration C U T T I N G T O O L S - A B R A S I V E S ADVANCED EDGE BI-METAL Part No. 51730 Description Maintenance 12 Pc. Set (3/4, 7/8, 1 1/8, 1 3/8, 1 1/2, 1 3/4, 2, 2 1/4, 2 1/2) w/Arbors (2) 51732 Plumber's 8 pc. Set (3/4, 7/8, 1 1/8, 1 1/2, 1 3/4, 2 1/4) w/ Arbors (2) BIMETAL HOLE SAW KIT Contents: • Saws (1 each): 3/4", 7/8", 1-1/8", 1-3/8", 1-1/2", 1-3/4", 2", 2-1/4", 2-1/2", 3", 3-1/4", 3-5/8", 3-3/4", 4-1/4", 4-1/2" • Arbors (1 each): MA24, MA34, MA45P • Extension (1): 12" Part No. 51731 INDIVIDUAL Part No. 51602 51606 51610 51614 51616 51618 51622 51624 51626 51630 ARBORS Part No. 51718 51716 Size 5/8 3/4 7/8 1" 1 1/16 1 1/8 1 1/4 1 5/16 1 3/8 1 1/2 Part No. 51634 51638 51642 51644 51646 51648 51650 51654 51656 51660 51662 Size 1 5/8 1 3/4 1 7/8 2" 2 1/16 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 Part No. 51664 51666 51668 51670 51672 51674 51678 51682 51690 51694 Size 2 7/8 3" 3 1/8 3 1/4 3 3/8 3 1/2 3 3/4 4" 4 1/2 5" Description 19-piece set ARBOR PILOT DRILL • Interchangeable with any arbor (Part Nos. 51710-51718) Part No. 51709 51715 51717 Size 1/4" flatted shank, 4 5/16" long 1/4" carbide tipped, 2 7/8" long 1/4" flatted shank 3 1/16" long EXTENSION • Fits 7/16 - Hex shank arbors only Fits Saws 51710 9/16 - 1 3/16 51711 1 1/4 - 6" Shank Thread 1/4 3/8 3/8 1/2-20 7/16 5/8-18 TUNGSTEN CARBIDE GRIT • These long lasting hole saws have tungsten carbide grains bonded to alloy backs with a gulleted, snag resistant edge • 1 1/2" cutting depth eliminates the need for deep hole saws • Carbide tipped pilot drill recommended for masonry type materials • Ideal for cutting ceramics, fiberglass, cast iron, brick, cinder block, hardened steel and other composites • Extremely resistant to heat, wear and abrasion with shock resistant back Part No. 51735 INDIVIDUAL Part No. 51607 51615 51623 51627 51631 51639 51645 Size 13 Pc. Set (3/4-2 1/2) INDIVIDUAL Part No. Size 3/4 1" 1 1/4 1 3/8 1 1/2 1 3/4 2" Part No. 51649 51651 51657 51663 51667 51683 Size 2 1/8 2 1/4 2 1/2 2 3/4 3" 4" Tip: Pre-drilling 1/4" pilot hole will increase the performance and improve the control and accuracy of the cut. K-40 51720 51721 51613 51722 51621 51723 51724 Size 3/4 7/8 1" 1 1/8 1 1/4 1 3/8 1 1/2 Part No. 51725 51726 51727 51728 51665 51681 Size 1 3/4 2" 2 1/4 2 1/2 3" 4" WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov AVAILABLE ASSORTMENTS 85849 - Pg. A-120 - Bi-Metal INFORMATION CONTAINED HEREIN IS CONFIDENTIAL/TRADE SECRET INFORMATION OF TIFCO INDUSTRIES, INC. REPRODUCTION AND/OR DISTRIBUTION IS PROHIBITED. Part No. 51719 Size 12" Extension / 7/16 Hex CARBIDE TIPPED • Tungsten carbide tips offer the highest wear resistance and longer life on abrasive materials such as stainless steel and other metal over 1/4" thick, fiberglass, particle board, formica, composites, aluminum, plastic, nail-free wood and hardwoods • Superior resistance to heat • Hole saws have three teeth per inch, 1 1/2" cutting depths Part No. Size 51729 9pc. Set (3/4-2 1/2)
The Right Part In The Right Place At The Right Time
